Resawing is the process of cutting a large plank of wood into two or more thinner boards. It’s one of the best ways to save money on lumber, but it can be difficult to do with some tools.
A bandsaw is best for resawing because you can easily adjust the height and width while you are working. However, there are many different types available on the market today which makes choosing one hard sometimes!
In this article, we will showcase the 10 best bandsaws for resawing so that you can find what best suits your needs.
|Image||Bandsaw||Motor Power||Resaw Capacity||Price|
|JET JWBS-18-3||3 HP||16"||See details at Amazon|
|Grizzly G0513ANV||2 HP||12-1/8"||See details at Amazon|
|Laguna MBAND1412-175||1.75 HP||12"||See details at Amazon|
|JET JWBS-15||1.75 HP||14"||See details at Amazon|
|Grizzly G0555XH||1.75 HP||12"||See details at Amazon|
|Powermatic 1791216K||1-1/2 HP||13-1/2"||See details at Amazon|
|Delta 28-400||1 HP||13-5/8”||See details at Amazon|
|Shop Fox W1706||1 HP||12"||See details at Amazon|
|WEN 3962||0.5 HP||6"||See details at Amazon|
|Rikon 10-305||0.3 HP||4-5/8″||See details at Amazon|
Best Bandsaw for Resawing in 2022 – Our Top 10 Choices
1. JET JWBS-18-3 Bandsaw
Without a doubt, the JET JWBS-18-3 is the best bandsaw for resawing. With higher resaw capacity, more throat depth and horsepower, it was designed to handle larger stocks.
It also has a heavy-duty cast-iron fence system which is sturdy and stable, as well as a micro-adjust dial to give you better precision. In addition to a slotted table, the guidepost features a magnetic door for easier blade changes.
There are honestly not many drawbacks to this bandsaw, and most users found it satisfactory. Sometimes, it could be tricky to set the table in parallel with the blade. The blade tension knob also doesn’t have a lock so it may move during vibrations.
- Great resaw capacity
- More throat depth and horsepower
- Heavy-duty cast-iron fence system
- Micro-adjust dial
- Easy blade changes
- Table and blade aren’t parallel
- No lock on blade tension knob
2. Grizzly G0513ANV Bandsaw
The Grizzly G0513ANV features a 2 HP motor with a 12-1/8″ resaw capacity, while its 16-1/4″ throat can be used for larger pieces.
While competing most professional bandsaws with its affordable price, this bandsaw still comes with a deluxe fence, miter gauge, European blade guide and a micro-adjusting geared table.
Plus, its clear visual scale and quick-change blade release will make using this machine easy.
Unfortunately, its blade guide is said to have been poorly constructed as it would fall during use. You need to constantly tighten the guide, which might impede with your work. The major blade drift could also be detrimental to creating precise projects.
- 2 HP motor
- 12-1/8″ resaw capacity
- Micro-adjusting geared table
- Clear visual scale
- Quick-change blade release
- Loose-fitting blade guide
- Major blade drift
3. Laguna MBAND1412-175 Bandsaw
Next, we wold like to recommend the Laguna MBAND1412-175, which is a 110 Volt bandsaw that feels so much more powerful.
This one features a quick-release tension, micro polished 21 X 16″ table and double windows so you can still check the tension and tracking while using the machine.
Not to mention the solid cast wheels that are fitted with polyurethane tires for cooler performance and longer durability.
This Laguna bandsaw is not without its drawbacks too, as some users have found some faults with its performance and construction.
It has a small footprint for its height, as well as an unstable three-wheel base. You need to be extra careful when moving the table around, as it might topple and fall over!
- Quick-release tension
- Micro polished 21 X 16″ table
- See-through double windows
- Polyurethane tire solid cast wheels
- Small footprint for height
- Unstable build
4. JET JWBS-15 Bandsaw
The JET JWBS-15 was designed to perform, offering a great resaw capacity, throat depth and motor of 1.75 horsepower. These features will let you handle larger stocks, create smooth edges and perform intricate cuts.
The heavy-duty cast-iron fence will provide extra stability while the micro-adjust dial means you can make exact placements. Also, it has a tool-less adjustable guide so you can save time when setting it up.
Undoubtedly the best bandsaw for resawing that we have on this list, as this Jet machine has proven to flaunt few to no flaws! If you really want to be stringent and particular, you might receive a unit with bent corners.
This may not always be the case, but it could make the bandsaw more unstable when in use. Plus, it’s heavy and quite difficult to set up alone.
- Great resaw capacity
- 1.75 HP
- Heavy-duty cast-iron
- Micro-adjust dial
- Tool-less adjustable guide
- Possible faulty unit
- Heavy and not a one-man set-up
5. Grizzly G0555XH Bandsaw
The G0555XH is another excellent bandsaw from Grizzly, which has a 1.75HP motor and 12-inch resawing capacity. This bandsaw is CSA Certified and features a cast iron frame, as well as heavy-duty stand.
Not to mention that it comes with an extruded aluminum resaw fence and miter gauge too!
In all honesty, there is also not a lot of negative things to say about this bandsaw. Some customers have claimed to receive missing parts with their purchase. However, this issue is uncommon and easily resolved by contacting your seller.
- 1.75 HP motor
- 12-inch resawing capacity
- CSA Certified model
- Cast iron frame
- Stable heavy-duty stand
- Miter gauge
- Missing parts
6. Powermatic 1791216K Bandsaw
Another great option, which also happens to be the best bandsaw for resawing you can get, is the Powermatic 1791216K. It comes with a solid and sturdy iron casting foundation, as well as steel base cabinet, that will give you a vibration-less operation.
The large table offers a total of 15.0 x 20.0 inches of working area. Plus, it has a 1.5 HP motor for optimum power and a dial for infinite adjustments.
In terms of its weaknesses, it seems that many customers have received defective units. This hampers what would have been a high-performing tool.
Its quick-release feature can be useful when it works, but is otherwise useless and makes you project more difficult.
- Vibration-Free Operation
- Large worktable
- Optimum Power and Drive
- Easy Adjustments
- Defective units
- Quick release issues
7. Delta 28-400 Bandsaw
The Delta 28-400 is a 1-HP and 2-speed bandsaw with an easy tensioning system. Its heavy-duty steel frame will reduce flexing, while the aluminum trunnion table support ensures better durability.
Also, the 9 spoke wheels are made from aluminum and rubber-coated for more precise blade tracking.
However, this bandsaw comes only with one blade for a single type of operation. For multi-use purposes, you’d have to purchase additional blades and readjust the blade guide every time.
It also suffers from one design flaw: the roller bearing is secured to the frame using just one bolt. This causes the bottom block to swivel around.
- 2-speed bandsaw
- Heavy-duty steel frame
- Aluminum trunnion table support
- Precise blade tracking
- One blade only
- Design flaw
8. Shop Fox W1706 Bandsaw
The Shop Fox W1706 has a decent throat size for a cutting capacity of 13-1/2-Inch and 6-inch height, but you can get the extension kit to increase this to 12 inches.
Working on its 14-inch square table is easy, as it tilts 45° to the right and 10° to the left. Plus, this bandsaw comes with wheels, frame and table that are constructed from cast iron blade.
Unfortunately, this Shop Fox unit does have its drawbacks. Many customers have complained of the machine vibration violently when operating. Its wheels are also unstably built too.
- 13-1/2-Inch cutting capacity
- Extension kit available
- Wide table tilt
- Cast iron blade wheels, frame and table
- Terrible vibration
- Unstable wheels
9. WEN 3962 Bandsaw
You might want to check out the powerful WEN 3962 too, as it can cut up to 9-3/4 inches wide and six inches deep and. The large 14-1/8 x 12-1/2 inch worktable can swivel and tilt up to 45 degrees.
It has two speed options of 1520 and 2620 FPM, while the optional stand lets you use it standing or as on a benchtop.
However, the lack of pressure gauge makes it hard to properly adjust the tension and bearing of the blade. This makes changing blades a nightmare, as you would have to spend lots of time merely re-adjusting the tension.
- Large cutting capacity
- Spacious worktable
- 45-degree bevel table
- Optional stand
- No pressure gauge
- Re-tensioning issues
- Difficult to change blade
10. Rikon 10-305 Bandsaw
Finally, we have the Rikon 10-305. With a solid steel plate design that’s stronger than generic plastic, working on its large 13-3/4-Inch by 12-1/2-Inch cast iron table is easy.
The top-quality rip fence can be removed for free-hand work. Even better, it features a micro adjustable guidepost that can be easily controlled using a handle.
Despite its decent performance and build, the bandsaw might not be compatible with certain blade sizes. This could make choosing the right blade difficult. Some customers also claim to receive damaged pieces and parts.
- Solid Steel Design
- Large Cast Iron Table
- Rip fence
- Micro adjustable guidepost
- Incompatible blades
- Damaged parts
How to Choose the Right Bandsaw – The Beginner’s Guide
Here are 8 important things you should consider when choosing the best bandsaw for resawing.
1. Motor Power
When choosing the right motor power of your bandsaw, think about the size of stocks you are going to work with. For smaller stocks and minor resawing, 1-1/2 horsepower motor should be enough.
But if you plan on resawing larger hardwoods, you might need a 2-1/2 to 3 horsepower motor.
2. Cutting Capacities
Next, pay attention to the cutting capacities. Throat capacity refers to the distance between the blade and the column, which can also tell you the bandsaw size.
For example, a 14” bandsaw means that it has a 14” cutting capacity. On the other hand, the distance between the table to the tallest of the blade guide is known as the resaw capacity.
Read also: 10 Best Belt Sanders for Deck
3. Frame Style
The two most common frame styles are cast-iron and steel frame. The first is a traditional type that’s great for everyday use, although it has limited cutting capacity and motor size.
Steel frame is more recent and gaining popularity, as its one-piece design can give you larger cutting capacities without decreasing its strength.
4. Blade Guides
Another important factor to look at is the blade guides, including the trust support and side supports of the upper and lower guides. Two popular guide types found in bandsaws today are the bearing blade and ceramic blade guides.
While the first is more common as it uses sealed bearings for guidance, the latter is more stable and durable.
5. Bandsaw Blades
Different types of blades are suitable for different jobs, so you need to know the most common bandsaw blades. The hook-tooth is great for cutting thick woods quickly, as its teeth are larger and stronger.
Skip-tooth is better for handling non-ferrous materials like soft woods and plastic. Meanwhile, the most versatile and general type is the regular tooth, which can be used for fine and thin materials.
6. Table size
While table size may not be the most important factor, I would recommend the 16″ x 20″ table for general use. It is enough to handle larger projects without being too bulky. However, try to get heavy cast iron tables that can be adjusted to various angles.
For everyday home projects, a heavy fence is the best choice. Make sure that it has an adjustment mechanism too. A good bandsaw fence will help you resaw woods more accurately, as well as ripping rough lumber and cut tenons precisely.
Try not to overspend on the most expensive bandsaw you can find. Still, it might be worthwhile to invest in better quality models. This will let you use the bandsaw for many years.
At the end of the day, the best bandsaw for resawing is the one that most fits within your budget, need and preference. Think about what power, cutting capacity, frame style and table size would be best for your use.
Reading customer reviews might be a good idea too. Good luck!