8 Best Miter Saws for Furniture Making

By

on

List of miter saws for furniture making

A miter saw is an essential tool for any furniture maker. It allows you to make precise, angled cuts quickly and easily.

The problem is there are so many miter saws on the market, it can be hard to know which one is right for you. That’s why we’ve put together this list of the 8 best miter saws for furniture making. Let’s get started.

1. DeWalt DWS779

DeWalt DWS779 miter saw

The first of the best miter saw to make furniture on our list is the DeWalt DWS779. The sliding compound miter saw comes with a powerful 15 Amp with up to 4000 RPM. This makes it perfect for everyday job site use.

It is also very accurate, due to the cam lock miter handle with detent override. It also provides quick and accurate miter angles.

The tall sliding fence support is another great feature, as it supports 7-inch crown nested and up to 14-inch dimensional lumber at 90 degrees, as well as supporting a two-by-ten board at 45 degrees.

The miter saw is very easy to operate and it comes with dual horizontal steel rails that have an innovative clamping mechanism and linear ball bearings to make sure it is accurate and durable.

However, a user found the saw lacking in lasers, while another found the belt drive to take just a touch getting used to.

Pros:

  • Cam lock miter handle
  • Tall sliding fence support
  • Dual horizontal steel rails

Cons:

  • Lacking in lasers
  • Belt drive takes getting used to

2. Metabo HPT C10FCGS

​​Metabo HPT C10FCGS

Weighing only 24.2 lbs, the Metabo HPT C10FCGS is the lightest miter saw in its class. It has a large table with a vice clamping system to hold your workpiece safely in place.

The 15 amp motor produces a no-load speed of up to 5000 RPM, making crosscuts and miters with ease. Additionally, the C15FCG has an extended flip fence that allows you to cut large workpieces with accuracy.

The thumb-actuated positive miter stops make for simple and accurate adjustments to the bevel, while the 45-degree range to the left provides clean and accurate bevel cuts. The included dust collector attachment helps keep your workspace clean and safe. Plus, it’s covered by Metabo HPT’s five-year warranty.

However, some buyers found that Metabo HPT C10FCGS’s fence is not square and bowing in a bit toward the blade’s base on the backside. Also, the instructions are not the easiest to follow.

Pros:

  • Lightweight and easy to transport
  • Large table with a vice clamping system
  • 15 amp motor generates a no-load speed of up to 5000 RPM

Cons:

  • The fence is not square and bowing in a bit toward the blade’s base on the backside.
  • Instructions are not the easiest to follow.

3. Hitachi C10FCG

Hitachi C10FCG

The Hitachi C10FCG is a lightweight, yet powerful miter saw designed for woodworkers who demand precision and versatility on the job.

This saw offers a bevel range of 0-45 degrees to the left, which makes it perfect for cutting bevels. Also, a miter range of 0-52 degrees to the right and left for increasing flexibility.

With a 15 Amp motor that produces up to 5,000 RPM, the Hitachi C12RSH is capable of handling the toughest cutting jobs. It is also designed with a horizontal handle for a more secure hold and comes with a large table for better material support.

Additionally, it has a dust collector to minimize airborne particles and Thumb actuated positive stops to provide quick miter adjustments.

However, the Hitachi C12RSH does have a few downsides like, after very little use, a user noticed a crack on one of the feet. Another user experienced problems unscrewing the screw to change the blade.

Pros:

  • Lightweight
  • Bevel range of 0-45 degrees
  • Miter range of 0-52 degrees

Cons:

  • Crack on foot after little use
  • Difficult to unscrew the blade screw for changing blades.

4. Genesis GMS1015LC

Genesis GMS1015LC miter saw

Another best miter saw for furniture making on our list is the Genesis GMS1015LC. The compound miter saw comes with a laser cutting guide for quicker alignment and improved accuracy.

The GMS1015LC also comes with a die-cast aluminum base for portability and better accuracy. The saw also has a hold-down clamp that will help you secure the wood to prevent it from slipping during cuts.

The saw is equipped with a quick electric brake that stops in seconds, an arbor lock for quick blade changes, and a 60T carbide blade installed. Nine positive detent miter stops lock firmly in place for faster setup and accurate cuts.

Some buyers found, however, that the clamp of this saw isn’t as strong as they would like it to be.

Pros:

  • Quick electric brake
  • Arbor lock for quick blade changes
  • Nine positive detent miter stops

Cons:

  • The clamp is not as strong as they would like it to be.

5. Makita LS1221

Makita LS1221

Weighs only 37 lbs., the Makita LS1221 is perfect for the contractor or serious hobbyist who wants a lightweight, yet durable 12” compound miter saw.

This saw is equipped with a 15 AMP direct drive motor engineered not to slip or bog down like belt-drive units and a large capacity pivoting fence for cutting up to 52” crown molding.

The Makita LS1221 has nine positive miter stops and an electric brake for maximum productivity. Not only that, but the saw also has a comfortable D-handle design for easy operation, and the base has been precision-machined for accurate cuts.

You can use the saw for making a broad range of cuts, including decking and flooring applications, siding installers, and finish carpenters.

Other features of the Makita LS1221 include a pivoting fence for supporting larger material and an electric brake.

However, one buyer said that the saw arrived with the top of the box open, and another mentioned that one of the clamps was missing. Another buyer complained of a crack in the base of the saw.

Nevertheless, these are relatively minor issues and do not take away from the overall quality of this saw.

Pros:

  • Lightweight
  • Durable
  • Nine positive miter stops
  • Electric brake

Cons:

  • Box arrived open on one occasion
  • Clamp missing on arrival for one buyer
  • Crack in the base of saw reported by another customer.

6. Evolution R255SMS+

Evolution R255SMS+ miter saw

If you need a multifunction miter saw, the Evolution R255SMS+ is a perfect choice! With the ability to cut wood with nails, wood plastic composite, plastic, and even mild steel; it is a must-have for any workshop!

The quick-release clamp and laser-guided precision make it easy to get the perfect angle and finish on your workpiece.

The Evolution R255SMS+ is only 34 pounds making it very portable. The rear carry handle allows you to easily pick up and safely transport your miter saw around the workshop or on-site.

The miter saw comes with a dust bag to keep your work environment clean and safe. The 15A hi-torque motor with an optimized gearbox and blade system allows you to cut through up to ¼” mild steel.

Also, the premium Japanese tungsten-carbide-tipped blade with more teeth for a cleaner cut will ensure the perfect angle and finish on your next woodworking project.

Some buyers have said that there is a little bit of wobble in the slide mechanism and that the hold-down clamp is not very heavy duty. The shelf is plastic so your metal shavings get embedded in the plastic.

Pros:

  • multifunctional
  • quick release clamp
  • laser-guided precision
  • lightweight and portable
  • hi-torque motor

Cons:

  • wobble in the slide mechanism
  • hold down clamp is not a heavy-duty
  • shelf is plastic

7. Skil MS6305

Skil MS6305-00

Another best miter saw for furniture making is the Skil MS6305 model. It is a high-quality product with many useful features that can be helpful for your outdoor projects or woodworking plans.

The saw comes with a 15-amp motor that can deliver up to 4800 rpm. This makes it perfect for tougher materials and larger projects. It also comes with a horizontal grip handle and a safety trigger that can be used for the left or right hand.

The Skil MS6305 has a positive stop at 11 different angles, which will make it easier to get the perfect cut. The LED Shadow Line will also help with precision and accuracy. And, finally, the quick work clamp will help to keep everything in place while you are cutting.

One buyer mentioned that the blade was slow to start. Another said that the bolt on the saw was tightened too tight and it caused some problems for her. But, overall, it is a great saw that would be perfect for any furniture-making project.

Pros:

  • 15 amp motor
  • positive stop at 11 different angles
  • LED Shadow Line
  • quick work clamp

Cons:

  • bolt on the saw was tightened too tight
  • slow to start blade.

8. BOSCH CM10GD

BOSCH CM10GD miter saw

The Bosch CM14GD is a miter saw that has several new and innovative features. One of these, the Axial-Glide system, allows you to cut up to 18″ deep in one pass. This is beneficial for you that are cutting crown molding or other large pieces.

The saw also has a bevel lock lever that is all metal and upfront on the saw for easy access. You can also quickly set the bevel angle at 47 degrees left or right without reaching around behind you.

The tall sliding fences support quick bevel setups and professional level precision. Another feature is the crown/chop lock that locks in place and can be powered through upright base molding and nested crown molding.

The Bosch CM14GD also has a combination dust chute and vacuum adapter to hook up your hose. The system is called the “click and clean” system, which ensures that the vacuum hose stays in place.

Some people have mentioned that the fences on the left and right are not coplanar and that the glide components “flex” are in use. There have also been complaints that the blade binds on bevel cuts and that it takes two months to get an authorized service repair.

Another common concern is that the trigger lock on the saw is unnecessarily stiff. Lastly, a buyer mentioned that the saw is poorly packaged and arrived broken.

Pros:

  • Axial glide system
  • Bevel lock lever
  • Quick bevel angle set up
  • Powerful motor

Cons:

  • Fences don’t stay coplanar when in use
  • Blade binds on bevel cuts
  • Authorized service center takes long

Final Thoughts

When it comes to choosing the best miter saw for furniture making, there are many factors to consider. Each model has its own set of pros and cons, so it is important to choose one that fits your specific needs.

The eight models we have listed here are some of the best on the market and should serve you well for any woodworking project you might undertake.

Hopefully, this blog post has helped you in making your decision. Happy sawing!

FAQ

1) What are the 3 types of miter saws?

There are three basic types of miter saws: compound, sliding and sliding compound.

  • Compound Miter Saws – This type of miter saw can make both miter and bevel cuts. They have a pivoting arm that allows the blade to swing out from the vertical position, making it easier to cut bevels.
  • Sliding Miter Saws – A sliding miter saw has a fixed arm, and the blade moves along a rail when it is cutting. This makes it possible to make wider cuts than you can with a regular compound miter saw.
  • Sliding Compound Miter Saws – As the name suggests, this is a type of miter saw that combines the features of both the compound and sliding types.

2) What is the most important feature to look for when buying a miter saw?

The type of material you plan on cutting. Sliding compound miters saws are ideal if your work involves thick pieces of wood, as they have more powerful motors and larger capacities than other types.

If you’re working with thinner materials, such as plywood, a regular compound miter saw will work just fine.

3) Can you rip with a miter saw?

Yes, you can rip with a miter saw. Rip cuts are made along the length of the wood grain and require that it be able to rotate to cut against the grain.

If your work involves ripping lumber, make sure your miter saw has this feature before deciding on which one to choose.

4) Is a double bevel miter saw worth it?

A double bevel miter saw allows you to tilt the blade both left and right, which is useful for making angled cuts. However, they are also more expensive than regular compound miter saws. If you don’t need this feature, it’s probably not worth paying the extra money for a double bevel model.


Category: